PAP150 / C-9415 / FC-0687
150 sq ft replacement filter cartridge • 10.0625″ OD × 31.125″ long
Ready to compare listings?
View PAP150 replacement options on Amazon
Use the part-number links below to compare compatible cartridges. Prices and availability vary, so verify dimensions before ordering.
Cross-Reference & Interchangeable Part Numbers
| Brand | Part Number | Type |
|---|---|---|
| Pleatco | PAP150 | Primary |
| Unicel | C-9415 | Equivalent |
| Filbur | FC-0687 | Equivalent |
| OEM | Pentair R173216 | Original Equipment |
Always verify dimensions and end-cap type before purchasing a replacement.
Compatible Pool Filter Systems
| Brand | Model |
|---|---|
| Pentair | Clean & Clear 150 |
| Pentair | Predator 150 |
Frequently Asked Questions
What are the dimensions of the PAP150?
The PAP150 measures 10.0625 inches in outer diameter and 31.125 inches in length, with a open top and open bottom. It provides 150 square feet of filtration area. Always measure your existing cartridge or check the label inside the filter housing before ordering - outer diameter and length are the two critical dimensions, but end-cap style must also match.
What other part numbers are interchangeable with the PAP150?
The PAP150 is interchangeable with C-9415, FC-0687, and OEM equivalents including Pentair R173216. All of these share the same 10.0625" OD × 31.125" dimensions and open top / open bottom end caps. When buying a cross-reference, confirm the end-cap style matches - a small difference in cap design can prevent proper seating in your filter housing.
How often should I replace a PAP150 filter cartridge?
At 150 sq ft, the PAP150 is a large-format pool filter cartridge. In a residential pool with balanced chemistry and regular backwash cycles, most owners get 18-24 months of service before replacement is needed. Inspect the pleats every 3-4 months - if you notice channeling, torn fabric, or the cartridge won't rinse clean, replace it regardless of age.
How do I clean a PAP150 filter cartridge?
The PAP150 has open ends on both top and bottom, so water flows through freely. Remove the cartridge from its housing and rinse thoroughly with a garden hose, directing the stream at a 45-degree angle between the pleats - work from top to bottom, rotating around the cartridge. Avoid pressure washers, which collapse the pleats and permanently reduce filtration efficiency. For a deeper clean, soak the cartridge in a dedicated pool filter cleaner solution (following the product's dwell time instructions), then rinse completely before reinstalling. Having a spare cartridge on hand lets you swap and soak while the pool stays running.
Which hot tubs and spas use the PAP150 filter?
Refer to your spa's owner manual or the label inside the filter compartment to confirm compatibility. The part number is usually printed on the end cap of the existing cartridge.
Dimensions
Specifications
| Outer Diameter | 10.0625″ |
|---|---|
| Length | 31.125″ |
| Top Type | Open (no end cap) |
| Bottom Type | Open (no end cap) |
| Filtration Area | 150 sq ft |
| Primary Brand | Pleatco |
| Part Number | PAP150 |