PDO75 / 7CH-975 / FC-0475 / Dimension One 1561-12
75 sq ft replacement filter cartridge • 7″ OD × 10.625″ long
Compare on Amazon
PDO75 replacements on Amazon
The buttons below pull up Amazon results for each cross-reference part number. Same physical cartridge, different stickers, often different prices. Cross-shop and pick the cheapest option that has solid recent reviews.
Cross-Reference & Interchangeable Part Numbers
| Brand | Part Number | Type |
|---|---|---|
| Pleatco | PDO75 | Primary |
| Unicel | 7CH-975 | Equivalent |
| Filbur | FC-0475 | Equivalent |
| OEM | Dimension One 1561-12 | Original Equipment |
Always verify dimensions and end-cap type before purchasing a replacement.
Frequently Asked Questions
What are the dimensions of the PDO75?
The PDO75 is 7 inches in outer diameter, 10.625 inches long, with a handle top and a threaded bottom. Total filtration area is 75 square feet. Before ordering, pull your existing cartridge and measure it yourself, or check the label inside the housing. OD and length both have to match within about an eighth of an inch, and the end-cap style needs to match exactly so the cartridge seats properly when the lid closes.
What other part numbers are interchangeable with the PDO75?
PDO75 is the same physical cartridge as 7CH-975, FC-0475, plus OEM versions like Dimension One 1561-12. Same dimensions (7" × 10.625"), same handle top, same threaded bottom. The Pleatco, Unicel, and Filbur boxes ship the same media inside, just with different stickers. The only thing to watch is the end-cap style: if a cross-reference has a slightly different cap design, it may not seat right in your housing.
Is the Dimension One 1561-12 the same filter as the PDO75?
Yes. Dimension One 1561-12 is an OEM number, the code the tub or pool builder stamps on the cartridge they ship. The filter itself is made by Pleatco, Unicel, or Filbur, so Dimension One 1561-12 and PDO75, 7CH-975, FC-0475 all point to one interchangeable cartridge. Buy whichever is cheapest with solid recent reviews, and just check that the dimensions match your old cartridge before you order.
How often should I replace the PDO75?
Most filter cartridges last between 12 and 24 months. Pull the PDO75 every few months for a hose rinse, soak it in cleaner quarterly, and replace it when the pleats are torn, channeling, or won't come clean. Bather load, water chemistry, and how often you actually clean it all matter more than the calendar.
How do I clean the PDO75?
The PDO75 has a built-in handle on top, which means you can pull it without touching the media. Pull the cartridge from the housing and hose it down. Hit the pleats from above at about a 45-degree angle so water rinses debris out instead of packing it deeper, and work top to bottom while rotating the cartridge. Skip the pressure washer. The high pressure tears or collapses pleats, and once that happens you've lost media that doesn't come back. Every few months (or at every water change, whichever comes first), do a deep clean: overnight soak in a hot tub filter cleaner, then a thorough rinse. If your cartridge has a closed end cap, let it dry before reinstalling so you don't trap moisture inside the cartridge core.
Which hot tubs and spas use the PDO75?
Pull your existing cartridge and read the part number off the end cap, or check the label inside the filter compartment. That's the most reliable way to confirm compatibility.
Dimensions
Specifications
| Outer Diameter | 7″ |
|---|---|
| Length | 10.625″ |
| Top Type | Handle |
| Bottom Type | Threaded fitting |
| Filtration Area | 75 sq ft |
| Primary Brand | Pleatco |
| Part Number | PDO75 |
Fitment notes
Semi-circular handle top with Pleatco's P3 adapter on the bottom, a 1-1/2 inch SAE thread. Confirmed through Dimension One OEM 1561-12, which Unicel resolves to the same 7CH-975 at matching diameter, length and end caps. Square footage is worth reading carefully: Pleatco rates it 75, Unicel's application tables agree at 75, and Unicel's spec tables rate its own 7CH-975 at 52. Dimension One sold a second cartridge in the same 7 by 10-1/2 inch envelope under OEM 1561-10, the 7CH-552, which takes a 2 inch male pipe thread instead of the 1-1/2 inch SAE, so match the fitting and not just the body. Pleatco also lists a PDO75P3 at identical published dimensions, rating and bottom fitting.