As an Amazon Associate I earn from qualifying purchases. Disclosure
FilterHound

PJAN145 / C-7482 / FC-0820

145 sq ft replacement filter cartridge • 7″ OD × 32.8125″ long

Ready to compare listings?

View PJAN145 replacement options on Amazon

Use the part-number links below to compare compatible cartridges. Prices and availability vary, so verify dimensions before ordering.

See all options on Amazon →

Cross-Reference & Interchangeable Part Numbers

BrandPart NumberType
PleatcoPJAN145Primary
UnicelC-7482Equivalent
FilburFC-0820Equivalent
OEMJandy/Zodiac R0357900Original Equipment

Always verify dimensions and end-cap type before purchasing a replacement.

Compatible Pool Filter Systems

BrandModel
JandyCL580
JandyCV580

Frequently Asked Questions

What are the dimensions of the PJAN145?

The PJAN145 measures 7 inches in outer diameter and 32.8125 inches in length, with a open top and open bottom. It provides 145 square feet of filtration area. Always measure your existing cartridge or check the label inside the filter housing before ordering - outer diameter and length are the two critical dimensions, but end-cap style must also match.

What other part numbers are interchangeable with the PJAN145?

The PJAN145 is interchangeable with C-7482, FC-0820, and OEM equivalents including Jandy/Zodiac R0357900. All of these share the same 7" OD × 32.8125" dimensions and open top / open bottom end caps. When buying a cross-reference, confirm the end-cap style matches - a small difference in cap design can prevent proper seating in your filter housing.

How often should I replace a PJAN145 filter cartridge?

At 145 sq ft, the PJAN145 is a large-format pool filter cartridge. In a residential pool with balanced chemistry and regular backwash cycles, most owners get 18-24 months of service before replacement is needed. Inspect the pleats every 3-4 months - if you notice channeling, torn fabric, or the cartridge won't rinse clean, replace it regardless of age.

How do I clean a PJAN145 filter cartridge?

The PJAN145 has open ends on both top and bottom, so water flows through freely. Remove the cartridge from its housing and rinse thoroughly with a garden hose, directing the stream at a 45-degree angle between the pleats - work from top to bottom, rotating around the cartridge. Avoid pressure washers, which collapse the pleats and permanently reduce filtration efficiency. For a deeper clean, soak the cartridge in a dedicated pool filter cleaner solution (following the product's dwell time instructions), then rinse completely before reinstalling. Having a spare cartridge on hand lets you swap and soak while the pool stays running.

Which hot tubs and spas use the PJAN145 filter?

Refer to your spa's owner manual or the label inside the filter compartment to confirm compatibility. The part number is usually printed on the end cap of the existing cartridge.

Dimensions

7″ OD32.8125″ L145 sq ftopen top

Specifications

Outer Diameter7″
Length32.8125″
Top TypeOpen (no end cap)
Bottom TypeOpen (no end cap)
Filtration Area145 sq ft
Primary BrandPleatco
Part NumberPJAN145