Marquis 370-0683 Filter Cartridge
Marquis OEM number • 35 sq ft • 5.1875″ OD × 12.5″ long
370-0683 is Marquis's number for this cartridge, not a part you have to buy from Marquis. The filter itself is a 35 square foot cartridge measuring 5.1875 inches across and 12.5 inches long, and Pleatco, Unicel, and Filbur all build it. If you read 370-0683 off an old cartridge or found it in your manual, any of the numbers below drops into the same housing.
Marquis also lists 20042, 20092, 370-0240, 370-0242, 370-0243, and 370-0698 against this cartridge. Different numbers on paper, same filter in the box.
Fitment notes
Bar handle top with a 2 inch male threaded bottom fitting. Marquis sells it as part 20042 and 20092, and its own filter chart puts three lines on it: the 35 sq ft Signature Series tubs from 2000 to 2021, every Vector21 from 2016 on, and the Nashville in both its Celebrity and Elite forms. Pleatco's application column also names the Epic, Euphoria, Reward and Show. The PPM50SC-F2M is the same 12-1/2 inch body at 50 sq ft, so check the square footage on your old cartridge. Also fits some Cal Spas models.
What to buy instead
Replacements for the Marquis 370-0683
Each button searches Amazon for one of the numbers this cartridge is sold under. The OEM version is usually the most expensive of the set and the aftermarket versions are the same physical filter, so it is worth checking all of them before you order.
Every number for this filter
| Brand | Part Number | Type |
|---|---|---|
| Marquis | 370-0683 | The number you searched |
| Pleatco | PPM35SC-F2M | Aftermarket equivalent |
| Unicel | 5CH-352 | Aftermarket equivalent |
| Filbur | FC-0195 | Aftermarket equivalent |
| Marquis | 20042 | Other OEM number |
| Marquis | 20092 | Other OEM number |
| Marquis | 370-0240 | Other OEM number |
| Marquis | 370-0242 | Other OEM number |
| Marquis | 370-0243 | Other OEM number |
| Marquis | 370-0698 | Other OEM number |
Full specs, the cartridge diagram, and the complete compatibility list live on the PPM35SC-F2M cartridge page. You can also see every 5.1875″ × 12.5″ cartridge if you are checking a measurement rather than a part number.
Equipment that uses this cartridge
Looking for a different model? Browse every Marquis model we cover.
Frequently Asked Questions
What filter replaces the Marquis 370-0683?
The PPM35SC-F2M replaces it directly, and so does every cross-reference for it: 5CH-352, FC-0195. All of them are the same 35 sq ft cartridge at 5.1875" outer diameter and 12.5" long. Buy whichever is cheapest at the time with solid recent reviews. The same cartridge also shows up as Marquis 20042, Marquis 20092, Marquis 370-0240, Marquis 370-0242, Marquis 370-0243, Marquis 370-0698, so those are not different filters either.
Is the Marquis 370-0683 the same as the PPM35SC-F2M?
Yes, physically the same filter. Marquis 370-0683 is an OEM number, meaning it is the code Marquis put on the cartridge that shipped with the equipment. Marquis does not manufacture cartridges. Pleatco, Unicel, and Filbur do, and they sell the identical part under their own numbers at a lower price. Match the dimensions against your old cartridge before ordering and you are covered.
Do I have to buy the Marquis version?
No. Nothing about the housing requires an OEM-branded cartridge, and the warranty on your equipment is not voided by using an aftermarket filter that meets the same spec. The reason to buy OEM is convenience, not performance. The reason not to is price, which is often a meaningful gap for an identical part. What matters is that outer diameter, length, and end-cap style all match.
What size is the Marquis 370-0683?
5.1875 inches in outer diameter, 12.5 inches long, with 35 square feet of filter media. Both measurements need to land within about an eighth of an inch, and the end caps have to match so the cartridge seats correctly when you close the lid. Measure your old one rather than trusting a number that has worn off the label.
Last verified August 2026