As an Amazon Associate I earn from qualifying purchases. Disclosure
FilterHound

Pentair 178585 Filter Cartridge

Pentair OEM number • 130 sq ft • 7″ OD × 32.0625″ long

178585 is Pentair's number for this cartridge, not a part you have to buy from Pentair. The filter itself is a 130 square foot cartridge measuring 7 inches across and 32.0625 inches long, and Pleatco, Unicel, and Filbur all build it. If you read 178585 off an old cartridge or found it in your manual, any of the numbers below drops into the same housing.

Pentair also lists 817-0143 and R173578 against this cartridge. Different numbers on paper, same filter in the box.

Fitment notes

3-inch top and bottom openings. Pentair Clean & Clear Plus 520 (4 cartridges, 520 sq ft total).

What to buy instead

Replacements for the Pentair 178585

Each button searches Amazon for one of the numbers this cartridge is sold under. The OEM version is usually the most expensive of the set and the aftermarket versions are the same physical filter, so it is worth checking all of them before you order.

See all options on Amazon →

Every number for this filter

BrandPart NumberType
Pentair178585The number you searched
PleatcoPCC130Aftermarket equivalent
UnicelC-7472Aftermarket equivalent
FilburFC-1978Aftermarket equivalent
Pentair817-0143Other OEM number
PentairR173578Other OEM number

Full specs, the cartridge diagram, and the complete compatibility list live on the PCC130 cartridge page. You can also see every 7″ × 32.0625″ cartridge if you are checking a measurement rather than a part number.

Equipment that uses this cartridge

Looking for a different model? Browse every Pentair model we cover.

Frequently Asked Questions

What filter replaces the Pentair 178585?

The PCC130 replaces it directly, and so does every cross-reference for it: C-7472, FC-1978. All of them are the same 130 sq ft cartridge at 7" outer diameter and 32.0625" long. Buy whichever is cheapest at the time with solid recent reviews. The same cartridge also shows up as Pentair 817-0143, Pentair R173578, so those are not different filters either.

Is the Pentair 178585 the same as the PCC130?

Yes, physically the same filter. Pentair 178585 is an OEM number, meaning it is the code Pentair put on the cartridge that shipped with the equipment. Pentair does not manufacture cartridges. Pleatco, Unicel, and Filbur do, and they sell the identical part under their own numbers at a lower price. Match the dimensions against your old cartridge before ordering and you are covered.

Do I have to buy the Pentair version?

No. Nothing about the housing requires an OEM-branded cartridge, and the warranty on your equipment is not voided by using an aftermarket filter that meets the same spec. The reason to buy OEM is convenience, not performance. The reason not to is price, which is often a meaningful gap for an identical part. What matters is that outer diameter, length, and end-cap style all match.

What size is the Pentair 178585?

7 inches in outer diameter, 32.0625 inches long, with 130 square feet of filter media. Both measurements need to land within about an eighth of an inch, and the end caps have to match so the cartridge seats correctly when you close the lid. Measure your old one rather than trusting a number that has worn off the label.

Data updated July 2026