Jandy CS150 Replacement Filter
cartridge filter system · 1 cartridge
Single 150 sq ft element. PJANCS150 / C-8414 / FC-0822. OEM R0462300.
| Pleatco | PJANCS150 |
| Unicel | C-8414 |
| Filbur | FC-0822 |
Frequently Asked Questions
What filter cartridge does the Jandy CS150 use?
The Jandy CS150, a cartridge filter system, uses the PJANCS150 (also sold as C-8414, all the same physical cartridge). Confirm the quantity in your owner's manual or by counting the cartridges in the housing when you open it up. Some Jandy models in the same series use a different number of cartridges than others.
How often should I replace the cartridge in my Jandy CS150?
150 sq ft is plenty of media. With balanced water chemistry, the cartridge in a Jandy CS150 should run 18 to 24 months before it needs replacing. Watch the pressure gauge: an 8 to 10 psi rise above the clean starting pressure is the practical time-to-clean-or-replace threshold. Once a soak in cleaner won't bring the pressure back down, the media is gone.
How do I clean the filter cartridge in a Jandy CS150?
Turn the pump off and bleed the pressure from the filter tank (open the air relief valve at the top). Then open the housing and pull the cartridge. Hose them down at a 45-degree angle between the pleats, working top to bottom. For a deeper clean every few months, soak in a pool filter cleaner solution per the product's dwell instructions, then rinse before reinstalling. Don't use a pressure washer. The high pressure tears pleats permanently.