Jandy CV460 Replacement Filter
cartridge filter system · 4 cartridges
115 sq ft · 7.125″ OD × 26.9375″ long
Note: The Jandy CV460 requires 4 cartridges. Order accordingly.
| Pleatco | PJAN115 |
| Unicel | C-7468 |
| Filbur | FC-0810 |
Frequently Asked Questions
What filter cartridge does the Jandy CV460 use?
The Jandy CV460 uses the PJAN115 (interchangeable with C-7468). Confirm the correct quantity in your owner's manual - the filter housing may also have a label indicating the part number.
How often should I replace the cartridge in my Jandy CV460?
The Jandy CV460 uses a 115 sq ft cartridge, which most homeowners replace every 12-18 months under normal residential use. Clean it every 2-3 months by rinsing between the pleats, and deep-clean quarterly with a filter-cleaning solution. Replace it when cleaning no longer brings the pressure back to baseline.
How do I clean the filter cartridge in a Jandy CV460?
Turn off the pump and release pressure from the filter tank (open the air relief valve) before opening the housing. Remove the cartridges (the Jandy CV460 uses 4) and rinse thoroughly with a garden hose, directing the stream at a 45-degree angle between the pleats. For a deeper clean, soak overnight in a pool filter cleaner solution, then rinse completely before reinstalling. Never use a pressure washer - it collapses the pleats and permanently reduces filtration.